The trimmer blade compatible with the Gamma+ range offers a safety in use due to the carbon steel material from which it is made. With an adjustment starting from 0.01 mm and a blade of type,,T'' offers precision in use.
Ceramic blade benefits:
It lasts much longer in time
Cut much more precisely
Do not heat the blades
The battery will last longer
The engine is not as in demand when running
Adjustment from: 0.1 mm
Material: Carbon steel
Blade model: T
Movable blade material: Ceramics
Compatible models:Gamma+ Absolute Hitter
It can be adjusted zero gap
Instructions for use:
Use this high precision and high quality blade with the necessary attention and care and you will ensure many years of proper operation
Unwrap the blade packaging carefully.
Remove the blade from the clipper by unfolding the two screws
Install the new blade on the clipper
Drip a few drops of oil on the new blade
Test the blade if it is adjusted and functional
Instructions for blade maintenance:
In order to keep the blade in an optimal working condition, the blade must be cleaned. Remove hair from the blade of the clipper with a brush or use a special spray for cleaning
Use suitable products for cleaning and lubricating the clipper
Precautions of use
After unpacking the product it is necessary that it is not put into operation for 2-3 hours to eliminate the possible condensation (if the product was transported at low temperatures or in wet, foggy weather)
Do not use the blade near pools or water bowls. Do not put the blade in water or other liquids.
Use the blade according to the instructions for use. Always check if the knife of the device is in good condition before using the device. Do not use it if it shows signs of malfunctions or if it has been dropped on the ground.
IMPORTANT! Always turn off the device when you do not use it or when you clean the blade
In case of failure, contact the supplier. Do not try to repair the blade
Always let the blade cool before storing the machine.
All product mounting operations must be performed in an authorized service and by qualified personnel.
If this condition is not observed and the installation is not performed by authorized personnel, our company is not responsible for any degradations or malfunctions of the product.